Introducing

Oberlin Filter's OLIMIN8R

THE MOST EFFICIENT AND PROFITABLE WAY TO MACHINE 

 

The OLIMIN8R: 

  1. Increases Production Time
  2. Eliminates Tank Cleanouts
  3. Eliminates Cleaning of Coolant Ports
  4. Prolongs Coolant Life

NEW!

OLIMIN8R 

OLIMIN8R Introduction Video

If your CNC machine equipment isn’t operating, you’re not making money. For every hour spent moving chip conveyors, shoveling out machine sumps and cleaning coolant ports, you’re losing hundreds, maybe even thousands of dollars. 

 

The main culprits are small chips and fine particles piling up in the machine sump, contaminating the coolant, plugging coolant ports and shutting down your machine. Oberlin Filter’s new OLIMIN8R removes those fine particles and chips. OLIMIN8R is a fully automatic pressure filter, with a small footprint, that is easy to install and operate. 

 

OLIMIN8R collects the dirty coolant upstream, removes the fine particles and turns them into a harmless dry cake that can be easily discarded. The clean coolant is returned downstream, near the clean pumps. No more filter bags to change, or magnetic separators, to clean. No more over flowing of the sump or pump cavitation, caused by chip buildup. This automatic process requires minimal operator intervention and uses inexpensive filter paper. 

 

Increased production time, prolonged tool life, and coolant that doesn’t have to be replaced as often. The most efficient and profitable way to machine, is brought to you, by Oberlin’s OLIMIN8R. 

The OLIMIN8R on a machine

 SHIPPING JANUARY 2019